Yinchuan Aini Industry And Technology CO.,ltd
Model No.: AN011
Type: Air Source Heat Pump: Power Supply: 230V~/50Hz
Heating Capacity: 1.7Kw: Storage / Tankless: Storage
Installation: Freestanding: Refrigerant: R134a
Water Tank Volume: 200L: Use: Bathrooms, Families
Productivity: 1000 set/Month
Place of Origin: NIng
Supply Ability: 1000 set/Month
AINI Series of Domestic Hot Water Heater is desighed to make domestic sanitary hot water. all-in-one heat pumps can saving 65% energy bills.it can be put in storage/garage or near the kitchen or the washing room. A lot of attention has been put to its appearance design. To make the whole unit small, the structure inside is also very compact and organized well.
The HeatSpring Heat Pump Water Heater can produce as high as 60oC outlet water. While in the market, most of the domestic water heaters make only 55oC. The 60oC high outlet temperature enables the water volume for use to increase by 30%.
As soon as water temperatrue for shower drops to the setpoint, the Heat Pump starts working so as to ensure constant shower.
Hot water can be supplied in a short time within 1hr as the inlet water temperature is greatly higher than that of tap water.
With sufficient hot water supply and fast heating technology, the heat pump covers the hot water requirement of a whole family.
The clear controller display, specially designed by PHNIX, makes it easy for users to power on/off, set temperature, timer and heating/defrosting mode.
a. Prevent build-up growth of legionella;
b. Higher temperature than 60oC will be dangerous for domestic use;
-Water Flow Switch Protection
When water inlet volume is low, the unit stops to protect the system. When the water volume recovers, the unit starts working again.
When the unit is standby and water inlet temp. is lower than 4oC but higher than 2oC, the water pump starts up to protect the system.
-High/Low Pressure Protection
High/Low pressure switches will switch off the heat pump automatically to protect the whole system when the pressure is over high/low.
-High Discharging Temp. Protection
When the compressor discharging temp. is higher than 110oC, the unit will not work until the temperature is lower than 85oC.
-Compressor Overload protection
When the compressor is working overload, the unit will stop working to protect the whole system.
Copyright © 2020 Yinchuan Aini Industry And Technology CO.,ltd All rights reserved.